Gold Open Access

Effect of Volume Fraction Variation of Hybrid Composite Reinforced Bamboo Fiber and Fiber-Glass Using Polyyester Resin on Tensile Strength and Impack

Akbar Gultom(1), Ferri Safriwardy(2Mail), Muhammad Nuzan Rizki(3), Masrullita Masrullita(4),
(1) Universitas Malikussaleh, Lhokseumawe, 24352, Indonesia
(2) Universitas Malikussaleh, Lhokseumawe, 24352, Indonesia
(3) Universitas Malikussaleh, Lhokseumawe, 24352, Indonesia
(4) Universitas Malikussaleh, Lhokseumawe, 24352, Indonesia

Mail Corresponding Author

Abstract


The field of materials and technology has developed rapidly, various types of inventions have been developed and researched to obtain new materials that are suitable for use at low production costs. The potential of bamboo plants is promising where the availability is abundant and sustainable, the utilization of specimens is made with polyester binders reinforced with natural and synthetic fibers. The type of bamboo that will be investigated for the tensile strength and toughness of the specimen with the difference in fiber volume fraction is a reference for the combination of bamboo fiber and fiber-glass where the volume fraction of 25% SB:25% FG, 35% SB:15% FG and 40% SB:10% FG particles at a fixed resin volume is 50%. Of the three variations in the volume fraction, the highest tensile strength in a balanced fiber filler is 40% bamboo fiber: 10% fiber-glass with an average value of 80.907 MPa, with a tensile strain of 2.53 % The lowest tensile strength value is in the volume fraction of 35% bamboo fiber: 15% fiber-glass with an average value of 75.552 MPa, with a tensile strain of 2.09%. For the highest toughness value of the specimen is in the volume fraction of 35% bamboo fiber: 15% fiber-glass, i.e., 0.83 J〖/mm〗^2 With an absorbed energy of 43.73 joules. On the other hand, the lowest toughness value is in the volume fraction of 25% bamboo fiber: 25% fiber-glass with an average value of 0.24 J〖/mm〗^2. With an absorbed energy of 39.94 joules. The observation results showed that the fiber volume was good at a percentage of 40% SB with 15% FG suitable for combination as an alternative tensile material. The toughness value in the volume fraction of 40% SB:10% FG is very low. However, the observation of bamboo fiber fracture results has a strong enough ability for the application of manufacturing products and others.


Keywords


bamboo fiber; volume fraction; polyester; tensile test; impact test; specimen fracture

   

Article DOI



DOI: https://doi.org/10.33122/ejeset.v5i1.137
       

Article Metrics

 Abstract views : 226 
 PDF views : 82 


   

Article Pages


Pages: 1-9

   

Full Text:

PDF

References


American Society for Testing and Materials. (2016). ASTM D638-14, Standard. ASTM International, 82(C), 1–15. https://doi.org/10.1520/D0638-14.1.

ASTM International. (2010). Astm D6110-10. ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States, April.https://doi.org/10.1520/D6110-10.1

Dicky, R. F. (2004). Pengaruh JKonsentrasi Koh Terhadap Kekuatan Tarik Dan Struktur Mikro Komposit Serat Rami Dan Serat Bambu. 1, 1–14.

Fabiana Meijon Fadul.(2019). Pengertian Komposit. 5–33.

Hendrikus, W., Boimau, K., dan Maliwenu, E. (2015). Pengaruh Variasi Fraksi Volume Serat terhadap Kekuatan Bending dan Impak Komposit Polyester Berpenguat Serat Agave Cantula atau lebih gabungan konstituen yang dan tidak larut dalam satu sama lain . Salah. Lontar Jurnal Teknik Mesin, 02(01), 39–50.

Lumintang, R. C. A., Soenoko, R., dan Wahyudi, S. (2011). Komposit Hibrid Polyester Berpenguat Serbuk Batang dan Serat Sabut Kelapa. 2(2), 145–153

Mokar, A. S., dan Mukhlis, M. (2022). Analisis Pengaruh Komposisi Lapisan/Laminat Terhadap Kekutan Impak pada Komposit Hybrid Serat Jute, Glass dan Resin Yukalac 157 Katalis. Dinamika, 6, 39 43.http://ejournal.unkhair.ac.id/index.php/Dinamik/article/view/4103%0Ahttp://ejournal.unkhair.ac.id/index.php/Dinamik/article/view/4103/2643

Rochim, T., (2001), "Spesifikasi, Metrologi, dan Kontrol Kualitas Geometrik", Institut Teknologi Bandung.

Porwanto, D. A., dan Johar, L. (2008).Karakterisasi komposit berpenguat serat bambu dan serat gelas sebagai alternatif bahan baku industri. Jurnal Teknik Fisika ITS, 1–16.

Putra, F. U., Paundra, F., Muhyi, A., Hakim, F., Triawan, L., dan Aziz, A. (2023). Pengaruh Variasi Tekanan Dan Fraksi Volume Pada Hybrid Composite Serat Sabut Kelapa Dan Serat Bambu Bermatriks Resin Polyester Terhadap Kekuatan Tarik Dan Bending. Journal Foundry, 6(1), 8–15.

Prasansi Harmi dan Tjahjanti., (2018). Buku Ajar Teori Dan Aplikasi Material Komposit Dan Polimer. Umsida Press, 1-24.

Riyanto Adetya., 2018. (2018). Pengaruh fraksi volume serat komposit hybrid berpenguat serat bambu acak dan serat e-glass anyam dengan resin polyester terhadap kekuatan bending. Jurnal Teknik Mesin, 06(02), 55–60.

Zulmiardi, Meritna, A. (2019). Pengaruh fraksi volume terhadap kekuatan tarik komposit polyester BQTN type 157-Ex yang diperkuat serat abaka. Seminar Nasional Teknik Industri, 4(1). https://repository.unimal.ac.id/4989/1/30-Paper-SNTI-2019.pdf


Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Akbar Gultom, Ferri Safriwardy, Muhammad Nuzan Rizki, Masrullita Masrullita

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0